Consilium Salwico NS-DUV UV Flame detector N1121- Used
The Consilium NS-DUV is obsolete and is replaced by the Salwico 5200039-00A EVC-IR Flame Detector.
The Consilium NS-DUV is obsolete and is replaced by the Salwico 5200039-00A EVC-IR Flame Detector.
THIS PRODUCT IS USED, BUT IN GOOD WORKING CONDITION.
The Consilium Salwico NS-DUV N1121 is a conventional UV Flame detector, suitable for all Salwico Fire Alarm Systems. The NS-DUV senses the Ultra-Violet rays that are emitted by flames. Since the detector is very sensitive to UV-rays, it has an advances alarm algorithm and special consideration has been given to reduce false alarms.
The NS-DUV N1121 is very suitable for use in harsh environments. Due to the wide supervising angle, the NS-DUV is able to cover a large area.
When the NS-DUV is in alarm condition, a red LED on the detector is lit. This LED remains lit until the alarm has been reset at the fire alarm panel. If the NS-DUV is connected to a CS3000 or CS4000 fire alarm system, the LED will not be lit after the panel has received the alarm. Only the LED on the address unit, to which the NS-DUV is connected, will be lit until the alarm has been reset.
| Weight | 1 kg |
|---|---|
| Sensor Type |
UV Tron |
| Wave Length Detection |
185 – 260 nm |
| Sensor Viewing Angle |
100° |
| Nominal voltage |
24VDC |
| Working voltage |
10-30 VDC |
| Operating current - supervising |
120 μA (max) |
| Alarm Current |
Max 65 mA |
| Alarm resistance |
0 Ohm |
| Remote Output |
Max 2 mA |
| Temperature range |
-25°C to +70°C |
| Relative Humidity |
0 to 95% RH |
| Color |
White |
| Material |
ACS |
| Weight |
~100 g |
| System/Series |
C300 ,C303 ,C308 ,C316 ,CFD5000 ,CS3000 ,CS3004 ,CS4000 ,NSAC-1 ,OEM Extinguish ,Salwico Cargo ,Salwico CCP ,Salwico Cruise ,Salwico LNG ,Salwico Navy ,Salwico Offshore ,Salwico Ro/Pax ,Salwico Workboat ,Salwico Yacht ,ServoMaster |
Related products
Need some help with your project?
Send an enquiry or contact us directly and we will try our best to help you.
