| Assembly | Enclosure & cable loom |
|---|---|
| Type | L101H multi-function LED, L101X Xenon Strobe Beacon, SONF1 alarm horn sounder |
| Cable loom | Pre-wired with termination PCBA |
| Terminals | 0.5 to 4.0mm2 cables |
| Ingress protection | IP66 Type 13/3R |
| Enclosure material | UL94V0 & 5VA FR ABS/PC |
| Enclosure colour | RAL3000 Red, RAL7038 Grey and White |
| Lens material | PC |
| Fixings | Stainless Steel |
| Operating temperature | -40° to +70°C [-40° to +158°F] |
| Storage temperature | -40° to +70°C [-40° to +158°F] |
| Relative Humidity | 95% at 20°C [68°F] |
| STA2 Weight | 0.95kg/2.09Ibs |
| STA3 Weight | 1.15kg/2.53Ibs |
| STA4 Weight | 1.35kg/2.97Ibs |
| Cable entries | 2 x M20 clearance |
| Nominal output | 99dB(A) @ 1m +/- 3dB – Tone 1 [90dB(A) @ 10ft/3m] |
| Maximum output | 100dB(A) @ 1 metre [91dB(A) @ 10ft/3m] |
| No. of tones | 10 (UKOOA / PFEER compliant) |
| No. of stages | 2 (AC voltage variants 1 stage) |
| Volume control | On board potentiometer |
| Effective range | 30m @ 1KHz |
| Monitoring | Reverse polarity diode protection on DC units. |
| Energy | 5 Joules (5Ws) |
| Flash rate | 1Hz (60 fpm) |
| Peak Candela | 500,000 cd – calculated from energy (J), 86,935 cd* – measured ref. to I.E.S. |
| Eff. Intensity cd | 200 cd* – measured ref. to I.E.S., 250 cd – calculated from energy (J) |
| Lens colours | Amber, Blue, Clear, Green, Magenta, Red, Yellow |
| Tube life | Emissions are reduced to 70% after 8 million flashes |
| Light Source | High intensity 18 x Cree SMT White L.E.D. array |
| Function | 1.0Hz (60 fpm) – 200ms ON 800ms OFF, 1.33Hz (80fpm) – 150ms ON 600ms OFF, 2.0Hz (120fpm) – 125ms ON 375ms OFF, Blinking – 425ms ON 75ms OFF, Double Flash, High Power Steady, Temporal Flash, Triple Flash |
| Peak/Effective Intensity cd | 180cd – measured ref. to I.E.S. |
Related products
Need some help with your project?
Send an enquiry or contact us directly and we will try our best to help you.
