D1xC1X10R 110dB(A) Radial Alarm & 10J Xenon Strobe

Maximum output 110dB(A) @ 1 metre [101dB(A) @ 10ft/3m]
Nominal output 105dB(A) @ 1m +/- 3dB – Tone 4 [96dB(A) @ 10ft/3m]
No. of tones 64 (UKOOA / PFEER compliant)
No. of stages 4
Volume control Full range
Effective range 125m/410ft @ 1KHz
Voltage DC 24Vdc (20-28Vdc)
Voltage AC 110-120Vac, 220-240Vac
Stage switching AC units: common supply line , DC units: negative or positive
Energy 10 Joules (10Ws)
Flash rates Option 1: 1Hz (60 fpm) , Option 2: 1.5Hz (90 fpm) , Option 3: Double Strike
Peak Candela 1,000,000 cd – calculated from energy (J) , 85,544 cd* – measured ref. to I.E.S.
Eff. Intensity cd 260 cd* – measured ref. to I.E.S. , 500 cd – calculated from energy (J)
Lens colours Amber, Blue, Clear, Green, Magenta, Red & Yellow
Tube life Emissions reduced to 70% > 5 million flashes
Safety Integrity Level SIL1 and SIL2 Route 2H IEC61508 (2010)
Ingress protection EN60529: IP66/67 , UL50E / NEMA250: 4 / 4X / 3R / 13
Enclosure material Chromated & powder coated – corrosion proof , Marine grade aluminium LM6 – copper free
Enclosure colour Red or Grey, custom colours available on request
Cable entries
Terminals 0.5 – 2.5mm2 (20-14 AWG) Pluggable, duplicated terminals
Grounding stud M5
Line monitoring Blocking diode included. EOL Min. 500 Ohm 2W, or 3k3 Ohm 0.5W resistor or diode (DC versions) can be fitted
Installation temp -55 to +85°C [-67° to +185°F]
Storage temperature -55 to +85°C [-67° to +185°F]
Relative Humidity 95% – Additional tropicalisation is recommended for applications where both high relative humidity and high ambient temperatures exist
Vibration test 35Hz for a duration 4Hr (UL464)
Jarring test 3ft/lb Energy (UL464)
Impact test 3x 5lb (UL464)
Weight 4.9kg/10.9lbs
SKU: E2S-D1xC1X10R Categories: , , Tag:

Related products

Need some help with your project?

Send an enquiry or contact us directly and we will try our best to help you.