The Dräger X-plore® 7500 Powered Air Purifying Respirator provides reliable protection, comfort, and safety for a wide range of industrial applications where hazardous gases, vapors and particles are present: from welding and grinding, to use in the chemical or agricultural industries.
Features
Two-stage warning device
Constant air flow
Comfort belt standard.
Benefits:
Versatile combination options
For the most varied applications there is a large program of Dräger X-plore® helmet, hoods and visors as well as Half and Full Face Masks available. The Draeger X-plore 7500 Powered Air Purifying Respirator has been tested and approved in accordance with EN 12942 or EN 12941.
Clear multifunctional control panel
The clear multifunctional control panel provides constant monitoring of the battery status and filter exhaustion. The air flow can also be adjusted via the multifunctional control panel. So everything is always under control at the press of a button.
High level of wearing comfort
The strength of the air flow can be adjusted to the individual requirements and can be freely adjusted to the respective application for helmets, hoods and visors or masks.
Acoustic and visual warning devices
Whether the service life of filters or the battery has been reached or whether the resistance is increasing or the air flow reducing, any potentially dangerous situation is indicated by a conspicuous flashing of the display and a vivid warning sound.
Powerful NiMH battery
With an operating time of 6 to 10 hours the environmentally friendly NiMH grants the greatest possible moveability and independence. The NiMH can be charged separately or whilst installed.
Use of standard Dräger X-plore® Rd40 filters
All the filters usable in the Draeger X-plore 7500 can also be used in pure mask/filter combinations. A single filter series thus covers the requirements of two applications, and no additional filters need to be kept in stock.
