The Azcue CA is a Close Coupled Centrifugal Self Priming Pump, designed to handle a wide range of liquids. As its inlet is towards the top of the casing, the CA is able to run dry for 30 minutes as they can hold a significant amount of liquid in the casing once initially primed. This means that the CA self priming pump is ideal for the transfer of clean fluids such as water and light fuels over long suction distances, where the tank is situated below the pump and for giving some leeway before the pump needs to be turned off.
Features
Close coupled, single stage centrifugal pump
Self priming pump which can run dry for 30 minutes after initial priming
Pump manufactured in Spain
Marine type approved by all classification societies
Available with open or closed impeller
Heavy duty grease lubricated ball bearing design
Compact horizontal design ideal for space saving installations
Available in cast iron, 316 stainless steel and bronze for seawater
Lantern bracket providing some space between pump head and motor
Back pull out design for simple maintenance
Separate shafts in the pump and motor
Long service interval of between 4000-8000 hours – bearing replacement at 35,000 intervals
Low NPSH
Casing wear rings to prolong casing and impeller life
Mechanical seal
230v, three phase 50Hz/60Hz motors available. IP55 as standard.
Also available with diesel engine or clutch/pulley driven
Assembly without alignment
ATEX versions available
