Dräger REGARD-1 Gas System
The Dräger REGARD-1 is a standalone, Self-Contained Single Channel Control System for the detection of Toxic, Oxygen and Ex hazards.
The Dräger REGARD-1 is a standalone, Self-Contained Single Channel Control System for the detection of Toxic, Oxygen and Ex hazards. The control system is fully configurable for a single input from either a 4 to 20 mA transmitter or a Polytron SE Ex measuring head.
Benefits:
High flexibility
There are 3 fully configurable alarm relays: rising or falling, latching or non-latching. The alarm status is displayed via three LEDs. They will flash with a new alarm, light up continuously to display an acknowledged alarm situation or extinguish if there is no alarm.
Useful additions
The Dräger REGARD-1 Gas System can be equipped with an optional TWA control module. This module enables the output of a TWA alarm as well as the repeat of a 4 to 20mA signal and the alarm states via a digital interface.
Robust enclosure
The robust IP65 enclosure enables the installation of the Dräger REGARD-1 at virtually any location within safe areas.
Certifications
In accordance with the ATEX directive, the system is certified to EN 61779-1/4/5 and EN 50104 for explosion monitoring and oxygen measuring and, therefore, also suitable for applications which require the measuring function for explosion protection (primary measure in accordance with EN 1127-1, paragraph 6). In addition, the Draeger REGARD-1 Gas System was also tested independently to EN 45544 for the monitoring of toxic gases.
Related products
Need some help with your project?
Send an enquiry or contact us directly and we will try our best to help you.
