Consilium Salwico NS-DUV UV Flame detector N1121- Used
The Consilium NS-DUV is obsolete and is replaced by the Salwico 5200039-00A EVC-IR Flame Detector.
The Consilium NS-DUV is obsolete and is replaced by the Salwico 5200039-00A EVC-IR Flame Detector.
THIS PRODUCT IS USED, BUT IN GOOD WORKING CONDITION.
The Consilium Salwico NS-DUV N1121 is a conventional UV Flame detector, suitable for all Salwico Fire Alarm Systems. The NS-DUV senses the Ultra-Violet rays that are emitted by flames. Since the detector is very sensitive to UV-rays, it has an advances alarm algorithm and special consideration has been given to reduce false alarms.
The NS-DUV N1121 is very suitable for use in harsh environments. Due to the wide supervising angle, the NS-DUV is able to cover a large area.
When the NS-DUV is in alarm condition, a red LED on the detector is lit. This LED remains lit until the alarm has been reset at the fire alarm panel. If the NS-DUV is connected to a CS3000 or CS4000 fire alarm system, the LED will not be lit after the panel has received the alarm. Only the LED on the address unit, to which the NS-DUV is connected, will be lit until the alarm has been reset.
| Weight | 1 kg |
|---|---|
| Sensor Type | UV Tron |
| Wave Length Detection | 185 – 260 nm |
| Sensor Viewing Angle | 100° |
| Nominal voltage | 24VDC |
| Working voltage | 10-30 VDC |
| Operating current - supervising | 120 μA (max) |
| Alarm Current | Max 65 mA |
| Alarm resistance | 0 Ohm |
| Remote Output | Max 2 mA |
| Temperature range | -25°C to +70°C |
| Relative Humidity | 0 to 95% RH |
| Color | White |
| Material | ACS |
| Weight | ~100 g |
| System/Series | C300, C303, C308, C316, CFD5000, CS3000, CS3004, CS4000, NSAC-1, OEM Extinguish, Salwico Cargo, Salwico CCP, Salwico Cruise, Salwico LNG, Salwico Navy, Salwico Offshore, Salwico Ro/Pax, Salwico Workboat, Salwico Yacht, ServoMaster |
Related products
Need some help with your project?
Send an enquiry or contact us directly and we will try our best to help you.
