Consilium Salwico NS-AH/A1S Heat Detector 54°C N11231
The Consilium Salwico NS-AH/A1S is an analogue addressable heat detector, designed for use in Salwico addressable fire alarm systems.
The Consilium Salwico NS-AH/A1S is an analogue addressable heat detector, designed for use in Salwico addressable fire alarm systems. The Salwico NS-AH/CS has a pre-programmed static alarm level of 54°C and it also gives a rate of rise pre-alarm. The pre-programmed static alarm level had a temperature of 54°C and it also gives a rate of rise pre-alarm. The NS-AH/A1S is marked with a green spot.
The Salwico NS-AH/A1S is a low profile detector with a high quality electronic sensing element of low thermal mass, which gives a very accurate and fast temperature reading. The temperature is displayed on the fire alarm panel.
When the NS-AH/A1S is in an alarm condition, a red LED on the detector will be lit. The LED will remain lit until the alarm has been reset.
| Weight | 1 kg |
|---|---|
| Operating principle | Rate of Rise, Static Temperature |
| Alarm Temperature | 54°C |
| Pre-Alarm Temp. Level | >45°C, rate of rise >10°C/min |
| Temperature range | -25°C to +90°C |
| Working voltage | 15-35 VDC |
| Nominal voltage | 24VDC |
| Operating current - supervising | 0.2 mA |
| Alarm Current | 2.5 mA |
| Remote Output | Max 2 mA |
| Relative Humidity | 0 to 95% RH |
| Color | White |
| Weight | ~95 g |
| System/Series | CS3000, CS4000, NSAC-1 |
Related products
Need some help with your project?
Send an enquiry or contact us directly and we will try our best to help you.
