Apollo XP95 Manual Call Point – red (55100-905APO)
The Apollo XP95 Manual Call Point (55100-905APO) has been designed to operate on a loop of intelligent Fire Detection devices and when activated interrupts the polling cycle for a very fast response.
The Apollo XP95 Manual Call Point (55100-905APO) has been designed to operate on a loop of intelligent Fire Detection devices and when activated interrupts the polling cycle for a very fast response. This Apollo Manual Call Point is intended for indoor applications.
A seven-segment DIL switch enables the addressing of each Call Point at commissioning stage. When operated, the Apollo Manual Call Point interrupts the polling cycle for a fast response. Bi-colored LEDs indicate isolate and normal conditions.
Features
‘Plug and Play’ terminal connections for fast wiring
Continuity link for wiring test before commissioning
Reports an alarm in under 0.2 seconds
Resettable element.
| Warranty | 10 year |
|---|---|
| Color | Red |
| Weight | 151g |
| Materials housing | ABS, Polycarbonate |
| Length | 93mm (3.66in) |
| Width | 89mm (3.5in) |
| Height | 26.5mm (1.04in) |
| Detection principle | Operation of a switch. |
| Standards | EN 54-11 |
| Approvals | CCCf, CPR, LPCB |
| Protocol voltage (max) | 9V |
| Protocol voltage (min) | 5V |
| Protocol voltage | 5 to 9V peak to peak |
| Power-up surge current | 1mA |
| Maximum power-up time | 1 second |
| Quiescent current | 100μA |
| Quiescent current tested at | 24V dc |
| Humidity (max) | 95% RH |
| Humidity (min) | 0% RH |
| Humidity | 0% to 95% (no condensation or icing) |
| Humidity Note | no condensation or icing |
| Operating temperature (min) | -20°C (-4°F) |
| Operating temperature (max) | 60°C (140°F) |
| Operating temperature | -20 to 60°C (-4 to 140°F) |
| IP rating Value | IP24 |
| Storage temperature (min) | -30°C |
| Storage temperature (max) | 80°C |
| Storage temperature | -30 to 80°C |
Related products
Need some help with your project?
Send an enquiry or contact us directly and we will try our best to help you.
