Apollo Intelligent Mounting Base (45681-210FRA)
All Detectors in the Apollo Discovery range fit the Intelligent Mounting Base which is a low insertion force Base with stainless steel contacts for the Detector terminals.
Apollo XP95 Intelligent Mounting Base (45681-210FRA)
The Apollo XP95 Intelligent Mounting Base (45681-210FRA) simplifies the installation, addressing, and maintenance of detectors within the Apollo XP95 and Discovery ranges. By using Apollo’s proven XPERT addressing system, the base allows engineers to assign detector addresses quickly and accurately during installation, reducing start up time and eliminating the need for electronic addressing tools.
The base uses durable stainless steel contacts and a low input force design, making detectors able to be fitted quickly while keeping reliable long-term electrical connections. Once installed, the detector automatically reads its address directly from the XPERT card, making system setup easier and reducing the potential for configuration errors.
In addition, the one-way fitting mechanism guides the detector into the correct position, making sure of fast and accurate installation. The integrated locking feature helps secure the detector in place and prevents not needed removal in public or high traffic areas.
To further improve installation efficiency, Apollo has designed the base with a wide interior width for easy cable access and clearly marked terminals for clear wiring. The fixing slots accommodate a range of mounting positions, giving installers greater flexibility on site.
Key Features
- Compatible with Apollo XP95 and Discovery detectors
- Part Number: 45681-210FRA
- Simplifies detector addressing with the XPERT card system
- Automatically transfers the programmed address to the detector
- Uses durable stainless steel detector contacts
- Reduces installation effort with a low input force design
- Ensures correct installation through a one-way fitting mechanism
- Secures detectors with an integrated locking feature
- Prevents not needed removal
- Provides easy access to wiring terminals
- Supports mounting centres between 51 mm and 69 mm
- Includes a dedicated earth continuity terminal
- Speeds up installation and start up time
XPERT Addressing
The XPERT card allows engineers to set detector addresses before fitting the detector.
- Remove the required coding pips to create the desired address.
- Insert the coded card into the side of the base.
- Lock the card into position.
- Fit the detector and allow it to automatically read the programmed address.
Related products
Need some help with your project?
Send an enquiry or contact us directly and we will try our best to help you.
