Apollo XP95 55000-620APO Optical Smoke Detector
The Apollo XP95 55000-620APO is an optical smoke detector which incorporates the light scatter principle.
The Apollo XP95 55000-620APO is an optical smoke detector which incorporates the light scatter principle. The light scatter principle is used to quickly and effectively detect a range of slow burning and smouldering fires.
The XP95 55000-620APO uses the same outer case as the ionization smoke detector, and is distinguished by the indicator LED. The LED is clear in standby and red in alarm mode. Inside the case of the Apollo XP95 55000-620APO is a printed circuit board which on one side has the light proof labyrinth chamber with integral gauze surrounding the optical measuring system and on the other the address capture, signal processing and communications electronics.
Features
Reliable fire detection in areas with a wide temperature range from -20°C to +60°C
Ideal for escape routes
Unaffected by wind and atmospheric pressure
Insect resistant screen
| Warranty | 10 year |
|---|---|
| Applications | Bedrooms, Escape routes, Hotels, Medium to large buildings, Offices, Restaurants, Retail |
| Fire Type | Slow burning, smouldering fires |
| Color | White |
| Sensor configuration | Horizontal optical bench housing infra-red emitter and sensor, arranged radially to detect forward scattered light. |
| Weight | 105g |
| Materials housing | Polycarbonate |
| Materials terminals | Nickel plated stainless steel |
| Length | 42mm (1.65in) |
| Diameter | 100mm (3.94in) |
| Detection principle | Photo-electric light scattering. |
| Standards | EN 54-7 |
| Approvals | BOSEC, CPR, FG, LPCB, SBSC, VdS |
| Analogue value nominal | 25 |
| Analogue value (- tolerance) | 7 |
| Analogue value (+ tolerance) | 7 |
| Analogue value | 25 +7/-7 |
| Alarm level analogue value | 55 |
| Chamber type | Chevron |
| Protocol voltage | 5 to 9V peak to peak |
| Protocol voltage (max) | 9V |
| Protocol voltage (min) | 5V |
| Power-up surge current | 1mA |
| Maximum power-up time | 4 seconds |
| Status indicator - Alarm | Red |
| Status indicator - Fault | Off |
| Quiescent current | 340μA |
| Supply voltage (max) | 28V dc |
| Supply voltage (min) | 17V dc |
| Supply voltage (Vmin-Vmax) | 17 to 28V dc |
| Terminal functions L2 | +L2 Loop in & out positive, double terminal |
| Terminal functions L1 in | -L1 in Loop in & out, double terminal |
| Terminal functions +R | +R Remote indicator positive connection |
| Terminal functions -R | -R Remote indicator negative connection |
| Polarity | L1 & L2 are polarity insensitive |
| Battery powered | No |
| Sampling frequency | Once per second |
| Humidity (max) | 95% RH |
| Humidity (min) | 0% RH |
| Humidity Note | no condensation or icing |
| Humidity | 0% to 95% (no condensation or icing) |
| Operating temperature | -20 to 60°C (-4 to 140°F) |
| Operating temperature (max) | 60°C (140°F) |
| Operating temperature (min) | -20°C (-4°F) |
| Storage temperature (max) | 80°C |
| Storage temperature (min) | -30°C |
| Storage temperature | -30 to 80°C |
| Effect of wind speed | none |
Related products
Need some help with your project?
Send an enquiry or contact us directly and we will try our best to help you.
