Fire Sentry FS20X Fire and Flame Detector

The Fire Sentry FS20X is a Multi-Spectrum and UV/Dual IR/VIS Fire and Flame Detector with a proven UV solar-blind sensor.

The Fire Sentry FS20X is a Multi-Spectrum and UV/Dual IR/VIS Fire and Flame Detector with a proven UV solar-blind sensor. The Fire Sentry FS20X has a faster false-alarm free response to fires over a wider temperature range and with a much longer detection range compared to conventional UV/IR Detectors.

The conventional and older technology UV/IR Detectors which uses narrow band 4.3 micron IR Sensors will not respond to smoky fires if the Detector lens is contaminated with oil and other substances. Older technology UV/IR Detectors will not alarm to fires when they are installed behind glass windows.

The Fire Sentry FS20X is designed to alarm to all types of fires and in all industrial environmental conditions. If the signal of the FS20X is degraded due to heavy smoke or contamination, the Fs20X’s WideBand IR, Near Band IR and Visible Sensors will still alarm, but at reduced sensitivity and slower response time.

The Fire Sentry FS20X Flame Detector has a detection range of 61m (200ft) for the detection of a one square-foot Heptane reference fire. The cone of vision of the FS20X is greater than any other Multispectrum IR Detector.

Features
Patented WideBand IR Infrared combined with Ultraviolet
Detection range greater than 200 feet to 1 sq. ft. heptane fire
Patented Electronic Frequency Analysis
Visible Sensor for optimum false alarm rejection
Selectable detection sensitivities
Solar blind 90° full 100% cone-of-vision
Dual Microprocessors for reliable performance
Real-time clock for accurate time dating of events
FirePic up to 6 pre-fire event data storage
Event log up to 200 events with date and time stamp
Built-in RS-485 ModBus communication
Built-in non-isolated 4-20 mA analogue output (sink or source)
Alarm, fault and fire verification relays
Automatic optical path and electronic Self-Test
Widest operating temperature range
Patented Electronics Module for components protection with plug-in terminations for easy field installation
Two ¾” NPT OR 25mm conduit entries
Low power consumption
High RFI and EMI immunity
FM approved.

SKU: Fire-Sentry-FS20X Categories: , , Tag:

Related products

Need some help with your project?

Send an enquiry or contact us directly and we will try our best to help you.