The Autronica 116-BHH-520/EX/SPARE replaces the Autronica 116-BHH-520/EX. Autronica provides spare part detectors, specifically intended to replace legacy detectors. Autronica legacy detectors are simply replaced with the spare part detector. The 116-BHH-520/EX/SPARE provides the same functionality/configurability as the Autronica 116-BHH-520/EX it replaces.
Please check that the socket installed on board have been produced after 2004, otherwise you need to install the new BWA-100!!
Features
Spare part detector used to replace Autronica legacy detectors 1 to 1
The spare part detector provides the same functionality as the legacy detector it replaces
Easily mounted onto existing AutroSafe/Autroprime bases (BWA-100/BWA-101), no need to replace legacy bases
No software upgrade or re-configuration is necessary
Provides all detection benefits from AutroGuard® protector V-430
Fully compatible with AutroSafe version 3.6 and higher, and all Autroprime versions
AutroGuard RETRO is compatible with:
BBR-130, addressable base sounder
BBQ-130, addressable base sounder/strobe
BBR-52, Smartbuzzer
The Autronica 116-BHH-520/EX/SPARE is a multisensor detector, designed for use in hazardous area zones 0, 1 or 2. The BHH-520/EX/SPARE must be connected to the approved Autronica BZ-500 barrier. A rise in temperature will change the detection platform by increasing the smoke sensitivity in order to improve the detection of combustion gases from flaming fires producing barely a minimum of visible smoke particles. The principle of the Autronica BHH-520/EX/SPARE, combined with the advanced signal processing in the detector, ensures an early response to any type of fire development.
The Autronica BHH-520/EX/SPARE is designed for use with the Autronica AutroSafe and Autroprime interactive fire alarm system.
An additional coating of PCB combined with the adaptivity and the allround smoke sensitivity of BHh-520/EX/SPARE makes this detector suitable for industrial, maritime and offshore applications where there is a potential flaming or/and smouldering fire hazard.
Features
Interactive
Multisensor detectors ensure fast response to various fire developments
Smoke detector for detection of combustion gases mainly consisting of visible (large) particles. Heatbsensor assisted for early detection of flaming fires
Comprises DYFI+ adaptive and self-learning function
With SelfVerify function for reduced maintenance/testing and increased reliability
Built in thermistor for reading of temperature at the detector point
Selective towards misleading environmental phenomena that in a traditional system would lead to an unwanted fire alarm
Short circuit isolator in each detector
Additional coating of PCB
Automatic addressing
Proven technology
Designed to meet the requirement of the major maritime classification societies