Autronica BHH-500/EX/SPARE Smoke Detector – AutroGuard Retro Variant
The Autronica 116-BHH-500/EX/SPARE replaces the Autronica 116-BHH-500/EX. Autronica provides spare part detectors, specifically intended to replace legacy detectors. Autronica legacy detectors are simply replaced with the spare part detector. The 116-BHH-500/EX/SPARE provides the same functionality/configurability as the Autronica 116-BHH-500/EX it replaces.
The Autronica 116-BHH-500/EX/SPARE replaces the Autronica 116-BHH-500/EX. Autronica provides spare part detectors, specifically intended to replace legacy detectors. Autronica legacy detectors are simply replaced with the spare part detector. The 116-BHH-500/EX/SPARE provides the same functionality/configurability as the Autronica 116-BHH-500/EX it replaces.
Please check that the socket installed on board have been produced after 2004, otherwise you need to install the new BWA-100!!
Features
Spare part detector used to replace Autronica legacy detectors 1 to 1
The spare part detector provides the same functionality as the legacy detector it replaces
Easily mounted onto existing AutroSafe/Autroprime bases (BWA-100/BWA-101), no need to replace legacy bases
No software upgrade or re-configuration is necessary
Provides all detection benefits from AutroGuard® protector V-430
Fully compatible with AutroSafe version 3.6 and higher, and all Autroprime versions
AutroGuard RETRO is compatible with:
BBR-130, addressable base sounder
BBQ-130, addressable base sounder/strobe
BBR-52, Smartbuzzer
The Autronica 116-BHH-500/EX/SPARE is an Optical Smoke Detector that can be used in hazardous zone 0, zone 1 and zone 2. The 116-BHH-500/EX/SPARE has a built in thermistor and is designed to be used with Autronica’s interactive fire detection systems.
The Autronica BHH-500/EX is also known as:
BHH500/EX
BHH-500-EX
BHH500EX.
Features
Interactive
Comprises the DYFI+ adaptive and self learning functions
With SelfVerify function for reduced maintenance/testing and increased reliability
Selective to misleading environmental phenomena that in a traditional system would lead to an unwanted fire alarm
Detection of visible smoke
Built in thermistor for reading of temperature at the Detector point
Short circuit isolator in each Detector
Automatic addressing
Proven technology
Immune to electromagnetic disturbance
Additional coating of PCB
Designed to meet the requirement of the major maritime classification societies.
Weight |
~150 g |
---|---|
Material |
PC/ABS |
Color |
White |
Current Consumption - Stand By |
< 0,3 mA |
Current - External Alarm Indicator |
6mA |
CPD Certificate |
1134-CPD-017 |
IP Rating |
IP44D |
Operating temperature |
-20 to 70°C (-4 to 158°F) |
Humidity |
Max. 95% |
Related products
Need some help with your project?
Send an enquiry or contact us directly and we will try our best to help you.