Autronica 116-BHH-220/SPARE Multisensor Detector – AutroGuard Retro Variant

The Autronica 116-BHH-220/SPARE replaces the Autronica 116-BHH-220. Autronica provides spare part detectors, specifically intended to replace legacy detectors. Autronica legacy detectors are simply replaced with the spare part detector. The 116-BHH-220/SPARE provides the same functionality/configurability as the Autronica 116-BHH-220 it replaces.

Please check that the socket installed on board have been produced after 2004, otherwise you need to install the new BWA-100!!

Features
Spare part detector used to replace Autronica legacy detectors 1 to 1
The spare part detector provides the same functionality as the legacy detector it replaces
Easily mounted onto existing AutroSafe/Autroprime bases (BWA-100/BWA-101), no need to replace legacy bases
No software upgrade or re-configuration is necessary
Provides all detection benefits from AutroGuard® protector V-430
Fully compatible with AutroSafe version 3.6 and higher, and all Autroprime versions

AutroGuard RETRO is compatible with:
BBR-130, addressable base sounder
BBQ-130, addressable base sounder/strobe
BBR-52, Smartbuzzer

The Autronica 116-BHH-220 is a multisensor detector, based on an optical point smoke detector combined with a temperature sensor. A rise in the temperature will change the detection platform by increasing the smoke sensitivity in order to improve the detection of combustion gases from flaming fires that barely produce a minimum of visible smoke particles.

The multisensor principle combined with advanced signal processing in the BHH-220 ensures an early response to any type of fire development.

Features
Interactive
Ensures fast response to various fire developments
Smoke detector for detection of combustion gases mainly consisting of visible (large) particles. Heat sensor assisting for early detection of flaming fires.
With DYFI+ adaptive and self learning function
Built-in thermistor for reading of temperature at the detector point
Short circuit isolator in each detector
Comprises a built-in alarm indicator (LED)
Automatic addressing
Proven technology
EN 54-5/EN 54-7/EN 54-17
Designed to meet the requirement of the major maritime classification societies