Riken Keiki Gas Tracer

The Riken Keiki Gas Tracer is a small 5 sensor monitor with a built in sample pump. Riken Keiki Gas Tracer can monitor the standard gas safety hazards for gas/pipeline operations, (LEL combustibles, Oxygen content, and Carbon Monoxide), and it also has a high-sensitivity ppm CH4 leak tracker mode which reads down to 10 ppm.

The Riken Keiki Gas Tracer can also measure 100% volume Methane and display either %LEL or %Volume with the auto-ranging ability. The Riken Keiki Gas Tracer is suitable for gas line purge testing and the detection of small gas leaks.

Features
Monitors ppm, LEL, and % volume methane, O2 and CO
PPM leak detector, detects down to 10 ppm CH4
“Leak tracker” audible/visual alarm mode for CH4 and CO
0 to 100% volume Methane option
Auto-ranging display of % LEL and % volume
Barhole test mode
Bump test reminder option
Snap-logging – on demand data recording
Pump pause on demand extends battery life
Status indicators:
Pump active
Microprocessor status
Battery level
Internal sample drawing pump with up to 50 foot range
Vibration, visual, and audible alarms
Automatic backlight during alarms
Calibration reminder with lock out option
Lithium ion or alkaline power battery packs (interchangeable)
Quick charge
Glove friendly large buttons
Alarm latching or non-latching
High impact protective rubber overmoldin
Up to 600 hours of datalogging with alarm trends
Autocalibration or single calibration
TWA and STEL readings with lunch-break mode
Intrinsically safe, ATEX/IECEx/CE or c CSA us (optional)
High dust and water resistance design
2 year warranty.