STA4 Alarm with Xenon/LED Beacon Stack/Tower

Assembly	Enclosure & cable loom
Type	L101H multi-function LED, L101X Xenon Strobe Beacon, SONF1 alarm horn sounder
Cable loom	Pre-wired with termination PCBA
Terminals	0.5 to 4.0mm2 cables
Ingress protection	IP66 Type 13/3R
Enclosure material	UL94V0 & 5VA FR ABS/PC
Enclosure colour	RAL3000 Red, RAL7038 Grey and White
Lens material	PC
Fixings	Stainless Steel
Operating temperature	-40° to +70°C [-40° to +158°F]
Storage temperature	-40° to +70°C [-40° to +158°F]
Relative Humidity	95% at 20°C [68°F]
STA2 Weight	0.95kg/2.09Ibs
STA3 Weight	1.15kg/2.53Ibs
STA4 Weight	1.35kg/2.97Ibs
Cable entries	2 x M20 clearance
Nominal output	99dB(A) @ 1m +/- 3dB – Tone 1 [90dB(A) @ 10ft/3m]
Maximum output	100dB(A) @ 1 metre [91dB(A) @ 10ft/3m]
No. of tones	10 (UKOOA / PFEER compliant)
No. of stages	2 (AC voltage variants 1 stage)
Volume control	On board potentiometer
Effective range	30m @ 1KHz
Monitoring	Reverse polarity diode protection on DC units.
Energy	5 Joules (5Ws)
Flash rate	1Hz (60 fpm)
Peak Candela	500,000 cd – calculated from energy (J), 86,935 cd* – measured ref. to I.E.S.
Eff. Intensity cd	200 cd* – measured ref. to I.E.S., 250 cd – calculated from energy (J)
Lens colours	Amber, Blue, Clear, Green, Magenta, Red, Yellow
Tube life	Emissions are reduced to 70% after 8 million flashes
Light Source	High intensity 18 x Cree SMT White L.E.D. array
Function	Double Flash, High Power Steady, Temporal Flash, Triple Flash, 1.0Hz (60 fpm) – 200ms ON 800ms OFF, 1.33Hz (80fpm) – 150ms ON 600ms OFF, 2.0Hz (120fpm) – 125ms ON 375ms OFF, Blinking – 425ms ON 75ms OFF
Peak/Effective Intensity cd	180cd – measured ref. to I.E.S.