The Kidde Graviner MK6 Oil Mist Detector is an analogue addressable System. It is capable of monitoring up to 64 Detector heads fitted on up to 8 engines. This can be done without sample pipes and with a minimum amount of cabling. Each Detector head is a stand-alone device, and monitors a single crankspace.
The Kidde Graviner MK6 gathers oil mist density data and converts it to a digital signal for transmission via the data cable to the control unit. The control unit can be configured to monitor from one to eight engines.
Detector addresses are identified and associated with the appropriate engine. Deviation levels, average alarm levels and alarm output requirements are all set from the control unit.
Spare Parts for the Kidde Graviner MK6 Oil Mist Detector:
Partnumber Description
13455-D033 Door seal
21888-K043 Gland 25 mm (metal)
27411-K001 Fuse, 4 Amp., 20 mm, slow blow
35100-K187 Bezel
39155-K047 Function Key Membrane (Rev 2.0)
39155-K048 Status display Membrane (Rev 2.0)
43682-K032 Cable Harness
43682-K037 Loom
43682-K108 Cable assy 2,5 m – straight connector
43682-K108-00 Cable assy 5,0 m – straight connector
43682-K108-01 Cable assy 7,5 m – straight connector
43682-K108-02 Cable assy 10,0 m – straight connector
43682-K108-03 Cable assy 12,5 m – straight connector
43682-K108-04 Cable assy 15,0 m – straight connector
43682-K108-05 Cable assy 17,5 m – straight connector
43682-K108-06 Cable assy 20,0 m – straight connector
43682-K108-07 Cable assy 22,5 m – straight connector
43682-K108-08 Cable assy 25,0 m – straight connector
43682-K109 Cable assy 2,5 m – 90° connector
43682-K109-00 Cable assy 5,0 m – 90 connector
43682-K109-01 Cable assy 7,5 m – 90 connector
43682-K109-02 Cable assy 10,0 m – 90° connector
43682-K109-03 Cable assy 12,5 m – 90 connector
43682-K109-04 Cable assy 15,0 m – 90° connector
43682-K109-05 Cable assy 17,5 m – 90° connector
43682-K109-06 Cable assy 20,0 m – 90° connector
43682-K109-07 Cable assy 22,5 m – 90 connector
43682-K109-08 Cable assy 25,0 m – 90° connector
43682-K261 Loom
43782-K120 Control unit LCD display
43782-K178 Main processor board with LCD
44782-K071-02 Main processor board new version Mk6
44782-K071-02 Main processor board new version Mk6
44782-K098-01 8 engine status display board
44782-K102-02 Status display board
44782-K182 EEPROM
44782-K183X Interface board (replaces 44782-K085)
44782-K184 Junction box board (replaces 44782-K117)
53836-K170 Control Unit (Bulkhead Mount)
53836-K206 Control Unit (Flush Mount)
53836-K224-03 Junction box 3 inputs, with 2x25mm plastic glands
53836-K224-05 Junction box 5 inputs, with 2x25mm plastic glands
53836-K224-06 Junction box 6 inputs, with 2x25mm plastic glands
53836-K224-07 Junction box 7 inputs, with 2x25mm plastic glands
53836-K224-08 Junction box 8 inputs, with 2x25mm plastic glands
53836-K224-09 Junction box 9 inputs, with 2x25mm plastic glands
53836-K224-10 Junction box 10 inputs, with 2x25mm plastic glands
53836-K224-11 Junction box 11 inputs, with 2x25mm plastic glands
53836-K224-12 Junction box 12 inputs, with 2x25mm plastic glands
53836-K224-14 Junction box 14 inputs, with 2x25mm plastic glands
97450002 Cable black 7 x 0,5mm2
C9189-801 Switch window label
D4720-001-02 Junction box 2 inputs, with 2x20mm plastic glands
D4720-001-07 Junction box 7 inputs, with 2x20mm plastic glands
D4720-001-08 Junction box 8 inputs, with 2x20mm plastic glands
D4720-001-09 Junction box 9 inputs, with 2x20mm plastic glands
D4720-001-10 Junction box 10 inputs, with 2x20mm plastic glands
D4720-001-11 Junction box 11 inputs, with 2x20mm plastic glands
D4720-001-12 Junction box 12 inputs, with 2x20mm plastic glands
D4720-001-14 Junction box 14 inputs, with 2x20mm plastic glands
D5622-001 Detector head electronics only
D9221-024 Spares kit (straight connector)
D9221-025 Spares kit (90° connector)
E3561-301 Detector head complete
E3561-301-01 Detector (Short sample pipe)
MT0021 Download cable
P57100-113 EPROM
