Spectrex FS-1100 Flame Simulator


The Spectrex FS-1100 Flame Simulator is an essential tool to self-test the Spectrex Sharpeye IR3 Flame Detectors. The FS-1100 will test the integrity of all the system components and also tests the line of sight. The Spectrex FS-1100 simulates a fire that triggers the output of the Detectors to verify correct operation.

The Spectrex FS-1100 is suitable for foolproof, full loop testing of Flame Detection systems in Zones 1 & 2 and Zones 21 & 22 at up to 40ft (12m) testing distance.

Spectrex FS-1100 Flame Simulator

Please contact us for more information.
Long-range Flame Detector activation – at a range up to 40ft (12m) – a 33% increase compared to previous simulator models.
Reduced maintenance costs with easy access for testing detectors, in hard to reach places, from floor/deck level without the need for scaffolding or ladders
Highly portable – for hand held operation by a single operator
Easy aiming using laser diode
ATEX /IECE x approved for use in Zone 1 and Zone 21 hazardous areas
Single charge is sufficient to test up to 1,000 Detectors.
Detector types Sensitivity settings Min. testing distance testing distance
40/40I, 40/40UFI,
20/20CTIx,
older models 20/20I,
SI and XI
50ft (15m)
100ft (30m)
150ft (45m)
200ft (60m)
2.5ft (0.75m)
2.5ft (0.75m)
2.5ft (0.75m)
2.5ft (0.75m)
6.6ft (2m)
19.6ft (6m)
29.5ft (9m)
40ft (12m)
20/20MPI, 20/20MI-1 33ft (10m)
65ft (20m)
100ft (30m)
132ft (40m)
2.5ft (0.75m)
2.5ft (0.75m)
2.5ft (0.75m)
2.5ft (0.75m)
6.6ft (2m
8.2ft (2.5m)
19.6ft (6m)
26.2ft (8m)