E2S GNExCP6B-PB Push Button Manual Call Point


The E2S GNExCP6B Manual Call Points are available as Break Glass, Push Button or Tool Reset versions. These Manual Call Points are approved for Zone 1, 2, 21 and 22 hazardous areas for the control of fire and gas alarm systems.

All types of Manual Call Points are available with EOL or series resistors, diode or Zener diodes or an LED indicator and also with either single or double pole change over switches. All versions of this Manual Call Point are certified to ATEX and IECEx standards.

E2S GNExCP6B-PB Push Button Manual Call Point

Please contact us for more information.
Alternative housing colors are available to meet specific requirements
Single or double pole c/o switch
DIN rail mounted terminal blocks: 8 x 2.5mm²
Metallized polyester or stainless steel “Duty” label
Series and/or end of line resistors, diodes & Zener diodes
Indicator LED.
Classifications: II 2G Ex e d mb IIC T4 Gb
II 2D Ex t IIIC T80°C Db
IP66
Ambient: Ta = -40°C to +50°C, -40° to +131°F
Ingress Protection: IP66
Housing material: GRP - glass reinforced polyester (UV stable)
Color: RAL3000 Red (others available on request)
Cable entries: 2 x M20 clearance top and
1 x M20 clearance side
Back box can be rotated to give
2 x bottom and 1 x side entries
Stopping plugs: 2 x Ex e nylon plugs as standard
Brass and stainless steel plugs optional
Terminals: 6 x 4.0mm² / 8 x 2.5mm²
Weight: 1.3 kg/2.86Ibs