E2S GNExCP6B-BG Break Glass Manual Call Point
The E2S GNExCP6B Manual Call Points are available as Break Glass, Push Button or Tool Reset versions. These Manual Call Points are approved for Zone 1, 2, 21 and 22 hazardous areas for the control of fire and gas alarm systems.
All types of Manual Call Points are available with EOL or series resistors, diode or Zener diodes or an LED indicator and also with either single or double pole change over switches. All versions are certified to ATEX and IECEx standards.
Please
contact us for more information.
Alternative housing colors are available to meet specific requirements
Single or double pole c/o switch
DIN rail mounted terminal blocks: 8 x 2.5mm²
Metallized polyester or stainless steel “Duty” label
Series and/or end of line resistors, diodes & Zener diodes
Indicator LED.
| Classifications: |
II 2G Ex e d mb IIC T4 Gb
II 2D Ex t IIIC T80°C Db
IP66 |
| Ambient: |
Ta = -40°C to +50°C, -40° to +131°F |
| Ingress Protection: |
IP66 |
| Housing material: |
GRP - glass reinforced polyester (UV stable) |
| Color: |
RAL3000 Red (others available on request) |
| Cable entries: |
2 x M20 clearance top and
1 x M20 clearance side Back box can be rotated to give
2 x bottom and 1 x side entries |
| Stopping plugs: |
2 x Ex e nylon plugs as standard
Brass and stainless steel plugs optional |
| Terminals: |
6 x 4.0mm² / 8 x 2.5mm² |
| Test: |
Test key facility |
| Weight: |
1.2 kg/2.64Ibs |