E2S GNExCP6A-PB Push Button Manual Call Point


The E2S GNExCP6A Manual Call Points are available as Break Glass, Push Button or Tool Reset versions. These E2S Manual Call Points are approved for Zone 1, 2, 21 and 22 hazardous areas for the control of fire and gas alarm systems.

This E2S Manual Call Point is available with either single or double pole change over switches. All versions are certified to ATEX and IECEx standards.

E2S GNExCP6A-PB Push Button Manual Call Point

Please contact us for more information.
Alternative housing colors are available to meet specific requirements
Single or double pole c/o switch
Metallized polyester or stainless steel “Duty” label.
Classifications: II 2G Ex e d IIC T6 Gb
II 2D Ex t IIIC T60°C Db
IP66
Ambient: Ta = -40°C to +55°C, -40° to +131°F
Ingress Protection: IP66
Housing material: GRP - glass reinforced polyester (UV stable)
Color: RAL3000 Red (others available on request)
Cable entries: 2 x M20 clearance top and
1 x M20 clearance side
Back box can be rotated to give
2 x bottom and 1 x side entries
Stopping plugs: 2 x Ex e nylon plugs as standard
Brass and stainless steel plugs optional
Terminals: 6 x 4.0mm² cables
Weight: 1.3 kg/2.86Ibs