Other Equipment

Tyco 711H 516.900.103 Rate-of-Rise 60°C Heat Detector


The Tyco 711H 516.900.103 Rate-of-Rise 60°C Heat Detector is the new replacement for the Tyco 601PH-M 516.600.202.

The Tyco 711H 516.900.103 is heat detector which uses rate-of-rise and fixed temperature sensing. The Tyco 711H is a heat detector in the category A1R. A1 denotes a static response temperature of 54°C to 65°C (EN54-5). The suffix R denotes a rate-of-rise characteristic, but the fixed element provides a backstop for fires where the temperature builds up gradually.

Tyco 711H 516.900.103 Rate-of-Rise 60°C Heat Detector
The Tyco 711H is used in conventional two-wire detection systems, where the detectors are normally connected in zones. Each detector samples the ambient air every 5 seconds and if a fire condition is detected, a signalling current is drawn from the zone causing the Control and Indicating Equipment (fire alarm panel) to provide an alarm response for that zone.

Please contact us for more information.

Marine
Use both rate-of-rise and fixed temperature sensing
Category A1R heat detector
Designed for use in conventional two wire detection systems