The Drager Flame 2570 is an ultra-fast triple IR (IR3) Flame Detector that can detect hydrocarbon-based fires up to 90 meters. The Drager Flame 2570 has an extreme short response time and high reliability against false alarms.
Benefits:
Very fast and safe detection
The Drager Flame 2570 has a very short response time. It can detect fire flashes and explosions in less than 50 milliseconds. This Flame Detector warns of petrol fires 0.1 m2 in size from a distance of 90 meters in less than 2 seconds. Three infrared sensors make this fast and reliable flame detection possible. The device software processes the measured results digitally. This way the typical dynamic characteristics of a fire (e.g. flickering) are registered. This degree of reliability complies with the IEC 61508 safety integrity requirements of SIL2. Moreover, the Drager Flame 2570 has HART and RS-485 Modbus interfaces and requires very little power.
Less false alarms
The Drager Flame 2570 is immune to sources of interference. This prevents false alarms. Sources that often cause false alarms, such as welding work or hot CO2 emissions, no longer pose a problem. Moreover, the sensitive detection ensures that this Flame Detector does not falsely set off an alarm for fires emanating from other areas.
Robust and durable
The housing of the Drager Flame 2570 Flame Detector is very robust and weather proof. The window is heated to protect against icing or condensation. You can operate the Drager Flame 2570 reliably under various environmental conditions.
Easy inspection
The Built-in-Test (BIT) automatically checks the electronics and optics of the Draeger Flame 2570. You can also trigger the test manually. With the tri-colored LED at the front of this Flame Detector, it is easy for you to identify the device’s status quickly. Green stands for normal operation, yellow indicates a fault and red signals a fire alarm.
